VTech CS6629-3 User Manual

58
Appendix
Handset icons
Handset and telephone base indicators
Telephone base lights
IN USE
On when the telephone line is in use.
On when the answering system is answering a call.
On when you are registering a handset.
Flashes quickly when there is an incoming call.
Flashes when another telephone sharing the same line is in use.
Flashes when you are deregistering all handsets.
/ANS ON/OFF
On when the answering system is turned on.
Handset lights
On when the handset speakerphone is in use.
CHARGE On when the handset is charging in the telephone base or charger.
The battery icon ashes when the battery is low and needs charging.
The battery icon animates when the battery is charging.
The battery icon becomes solid when the battery is fully charged.
The speakerphone is in use.
The handset ringer is turned off.
There are new voicemail received from the telephone service provider.
The message number currently playing and total number of new/old
messages recorded.
ANS ON The answering system is turned on.
ECO
The ECO mode activates automatically to reduce power consumption when the
handset is within range from the telephone base.
NEW The entry you are reviewing is new in the caller ID log.
1/13

VTech CS6629-3 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory	50 memory locations; up to 30 digits and 15 characters
handset call log memory	50 memory locations; up to 24 digits and 15 characters
nominal effective range	Maximum power allowed by FCC and IC