VTech CS6629-3 User Manual

7
Getting started
Telephone base layout
/ANS ON/OFF
Press to turn the answering
system on or off (page 43).
•
/FIND HANDSET
Press to page all system
handsets (page 24).
•
VOL
-
and VOL
+
Press to adjust the volume during message
playback (page 50).
When the phone is not in use, press to adjust
the telephone base ringer volume (page 11).
•
•
/SKIP
Press to skip to the next
message (page 50).
•
/REPEAT
Press to repeat the playing
message (page 50).
Press twice to play the previous
message (page 50).
•
•
/PLAY/STOP
Press to play messages
(page 50).
Press to stop message playback
(page 50).
•
•
X/DELETE
Press to delete the message
currently playing (page 50).
When the telephone is not
in use, press twice to delete
all previously reviewed
messages (page 51).
•
•
Message window
Shows the number of messages, and other
information of the answering system or telephone
base (page 52).
•
IN USE light
Flashes when there is an
incoming call, or another
telephone sharing the same line
is in use.
Flashes when handsets are
being deregistered.
On when a handset is in use.
On when the answering system
is answering a call.
On when a handset is being
registered.
•
•
•
•
•

VTech CS6629-3 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory	50 memory locations; up to 30 digits and 15 characters
handset call log memory	50 memory locations; up to 24 digits and 15 characters
nominal effective range	Maximum power allowed by FCC and IC