VTech CS6629-3 User Manual

3
Getting started
Place the battery with the label
THIS SIDE UP facing up and
the wires inside the battery
compartment.
2.
Plug the battery connector securely
into the socket, matching the
orientation of the engraved label.
1.
Slide the battery compartment cover
towards the center of the handset
until it clicks into place.
3. Place the handset in the telephone
base or charger to charge.
4.
Battery installation
Install the battery as shown below.
CHARGE light
remains on
when charging.
If the handset will not be used for a long period of time, disconnect and remove the
battery to prevent any possible leakage.
To purchase replacement batteries, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
•
•

VTech CS6629-3 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory	50 memory locations; up to 30 digits and 15 characters
handset call log memory	50 memory locations; up to 24 digits and 15 characters
nominal effective range	Maximum power allowed by FCC and IC