VTech CS6629-3 User Manual

22
Telephone operation
Check voicemail
Press and hold 1 to dial your voicemail number.
See Voicemail number on page 15.
Chain dialing
Use this feature to initiate a dialing sequence from numbers
stored in the directory, caller ID log or redial list while you are on a call. Chain dialing
can be useful if you wish to access other numbers (such as bank account numbers or
access codes) from the directory, caller ID log or redial list.
To access a number in the directory:
Press MENU while on a call.
Press SELECT to choose Directory.
Press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number in the caller ID log:
Press MENU while on a call.
Press or to scroll to Caller ID log, then press SELECT.
Press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number on the redial list:
Press REDIAL while on a call.
Press , or REDIAL repeatedly to browse to the desired entry.
Press SELECT to dial the displayed number.
Press CANCEL to exit the directory, caller ID log or redial list when you are on a call.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.

VTech CS6629-3 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory	50 memory locations; up to 30 digits and 15 characters
handset call log memory	50 memory locations; up to 24 digits and 15 characters
nominal effective range	Maximum power allowed by FCC and IC