VTech CS6629-3 User Manual

18
Telephone settings
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse dialing
before using the telephone to make a call.
Press MENU when the phone is not in use.
Press or until the handset displays Settings,
then press SELECT.
Press or until the handset displays Dial mode,
then press SELECT.
Press or to choose Touch-tone or Pulse.
Press SELECT to save your selection. You hear a
conrmation tone.
1.
2.
3.
4.
5.
Dial mode
ECO
Touch-tone
ECO
Settings
ECO

VTech CS6629-3 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory memory	50 memory locations; up to 30 digits and 15 characters
handset call log memory	50 memory locations; up to 24 digits and 15 characters
nominal effective range	Maximum power allowed by FCC and IC