VTech CTM-S2110 - Handset Registration; Handset Deregistration

EN - 15
English
Handset Registration
Follow the steps below to register your cordless
handset to the base station.
You can register additional cordless handsets to
the base station. The Base station accommodates
up to four NGC-C5106 or CTM-C4402 cordless
handsets.
1. On the cordless handset, press the Lang
soft key, and then the key sequence:
7 5 6 0 0 #.
The key sequence will not be displayed on
the screen when entered.
2. With Registration selected, press OK.
3. With Register Handset selected, press
Select.
The handset displays the message
"Long press the FIND HANDSET button on
your base".
4. On the base station, press and hold the
/ FIND HANDSET button for at least four
seconds, then release the button. Both LEDs
on the base station begin to flash.
The handset displays "Registering handset".
5. If the handset prompts for the PIN, enter the
PIN and press OK. The default PIN is 1592.
The handset beeps and displays "Handset
registered".
Handset Deregistration
1. When a registered cordless handset is
idle, press the Lang soft key, and then
the key sequence: 7 5 6 0 0 #.
The key sequence will not be displayed
on the screen when entered.
2. With Registration selected, press OK.
3. Press or to select Deregister,
and then press Select.
4. Press or to select the handset
you want to deregister, and then press
Select.
NOTE: The handset you are currently
using is indicated by **.
5. If the handset prompts for the PIN, enter
the PIN and press OK. The default PIN
is 1592.
The handset beeps and displays
"HANDSET deregistered".