EN - 18
Operation
SIP 1-Line Hidden Base with Cordless
Color Handset and Charger -
CTM-S2116
1-Line Cordless Color Handset -
NGC-C5106
Using the cordless handset
When you use the keypad of the cordless
handset, the handset keys are backlit.
Change handset screen language
To change the display language of your handset
color screen:
1. Press Lang.
2. Press or to select a language.
3. Press OK.
Receive a call
When there is an incoming call, the handset
rings.
Answer a call using the cordless handset
while it is not on the handset charger
On the cordless handset, press Ans or
or .
• The icon appears in the middle of
the screen when in speakerphone mode.
Answer a call using the cordless handset
while it is cradled on the handset charger
Lift the cordless handset from the handset
charger.
Reject a call
Press Reject or .
Place a call
1. On the cordless handset, use the keypad to
enter the number.
• Press Delete if you enter an incorrect digit.
2. Press Dial or or .
3. To end the call, press End or or
place the handset in the charger.
Place a call during an active call
1. During a call, press New on the cordless
handset.
The active call is placed on hold.
2. Use the keypad to enter the number. If you
enter an incorrect digit, press Delete.
3. Press Dial.
End a call
Press on the cordless handset or place
it in the handset charger. The call ends when
all handsets hang up.
Switching between calls
If you have an active call and another call on
hold, you can switch between the two calls.
1. Press Switch to put the active call on hold,
and resume the held call.
2. To end the active call, press End or .
The other call will remain on hold.
3. Press Unhold to take the call off hold.
Share a call
A maximum of two cordless handsets can be
used at the same time on an external call.
Join a call
To join an active call that is taking place on
another handset, press Join.
Hold
To place a call on hold:
During a call, press Hold on the cordless
handset.
To take the call off hold, press Unhold.
To Next Page
Loading...
