EN - 16
Handset battery charging
The battery must be fully charged before using
the cordless handset for the first time. The battery
charge light turns on when the cordless handset
is charging on the handset charger. The battery
is fully charged after 11 hours of continuous
charging. For best performance, keep the
cordless handset in the handset charger when
not in use.
Replacing a Cordless Handset Battery
The cordless handset battery is preinstalled. To
replace the cordless handset battery, follow the
steps below.
1. Use a narrow object to pry open the handset
cover, so that you unsnap the tabs at the
locations indicated below.
2. Place your thumb in the slot below the battery,
and lift the battery out of the handset battery
compartment.
3. Place the top of the battery in the handset
battery compartment so that the battery
connectors are aligned.
4. Push the bottom of the battery down into the
battery compartment.
5. To replace the handset cover, align all
the tabs on the handset cover against the
corresponding grooves on the handset, then
firmly push downward until all the tabs lock
in the grooves.
CAUTIONS
There may be a risk of explosion if a wrong type
of handset battery is used. Use only the supplied
rechargeable battery or replacement battery.
To order a replacement, call 1-888-907-2007.
Dispose of used batteries according to the
information in the instructions.
To Next Page
Loading...
