VTech CTM-S2110 - Speakerphone; Volume; Mute; Call Waiting

EN - 19
English
Speakerphone
During a call, press on the cordless
handset to switch between speakerphone
mode and handset earpiece mode.
• The icon appears in the middle of
the screen when in speakerphone mode.
Volume
Adjust the listening volume
1. During a call, press or to adjust the
listening volume.
2. Press OK.
Adjust the Ringer volume
1. When the cordless handset is idle, press
or to adjust the ringer volume.
2. Press OK.
Mute
Mute the microphone
1. During a call, press on the cordless
handset.
• The handset displays "Call Muted" when
the mute function is turned on. You can
hear the party on the other end but they
cannot hear you.
2. Press again to resume the conversation.
Call waiting
If receive an incoming call during an active
call, you willl hear a call waiting tone.
The phone also displays "Incoming call".
To answer the incoming call:
• Press Ans on the cordless handset.
The active call is put on hold.
To reject the incoming call:
• Press Reject on the cordless handset.
Speed dial
To dial a speed dial number:
1. Press SpdDial.
2. Press or to select a speed dial
entry.
3. Press OK.
Alternatively, you can press a speed dial key
( or ), or press a speed dial soft key
(for example, RmServ).
Message waiting indicator
When a new voice message is received,
the handset displays " New msg" on the
screen.
Play messages
1. When the phone is idle, press .
The handset dials the voicemail access
number.
2. Follow the voice prompts to play your
messages.
Find handset
Use this feature to find all registered cordless
handsets.
To start paging:
Press / FIND HANDSET on the base station
when the phone is not in use. All idle cordless
handsets beep for 60 seconds.
To end paging:
• Press / FIND HANDSET again on the
base station.
-OR-
• Press on the cordless handset.