VTech CTM-S2110 - Technical Specifications; SIP 1-Line Hidden Base with Cordless Color Handset and Charger - CTM-S2116; SIP 1-Line Hidden Base - CTM-S2110; 1-Line Cordless Color Handset - NGC-C5106

EN - 33
English
Technical specifications
SIP 1-Line Hidden Base with Cordless Color Handset and Charger - CTM-S2116
SIP 1-Line Hidden Base - CTM-S2110
1-Line Cordless Color Handset - NGC-C5106
Charger - C5016
Frequency control Crystal controlled PLL synthesizer
Transmit frequency
Handset: 1921.536-1928.448 MHz
Base Station: 1921.536-1928.448 MHz
Channels 5
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary
according to environmental conditions at the time of use.
Operating temperature 32–104 °F (0–40 °C)
Power requirement
Handset:
• Battery: 3.7V 1000mAH, Li-ion (Model No. 523450AR1000)
• Use only the supplied battery or the battery indicated above
Handset charger: supplied power adapter:
• Input: 100-240V AC 50/60 Hz Output: 6V DC @ 450mA
• Model identifier: VT05EUS06045
• Manufacturer: VT-PLII
• Use only the power adapter indicated above for the handset charger
Base station:
• Power over Ethernet (PoE): IEEE 802.3at supported, class 2
• If PoE not available, supplied power adapter:
• Input: 100-240V AC 50/60Hz Output: 5.0V DC @ 2.0A
• Model identifier: VT07EUS05200
• Manufacturer: VT-PLII
• Use only the power adapter indicated above for the Base station
Message waiting signal SIP messaging RFC 3261
Speed Dial memory
Handset:
3 dedicated speed dial hard keys:
MESSAGES / FRONT DESK / EMERGENCY
10 speed dial keys - scroll list through SpdDial soft key menu
3 soft keys (default: Lang. / RmServ / SpdDial) that can be programmed as speed
dial keys
Ethernet network port Two 10/100 Mbps RJ-45 ports