11
Glossary of terms
Below are some terms used in this
user’s manual to help you become
familiar with using your Bluetooth enabled
cell phone and your new DS6621
telephone system.
Bluetooth cell phone - refers to a
Bluetooth enabled cellular telephone.
Cell line - the telephone line associated
with your cell phone service. On your
DS6621 handset, press /CELL to use
the cell line.
Connected - when you pair a Bluetooth
cell phone to the DS6621, it is
automatically connected. When a cell
phone is connected, 1 and/or 2 displays
after on the handset and the
CELL 1 and/or CELL 2/HEADSET
light on the telephone base is on. If a
cell phone loses its connection to the
telephone base, it must be reconnected
before you can use the cell phone with
the DS6621.
Disconnected - when a cell phone is
disconnected, the on the handset
no longer displays and the CELL 1
and/or CELL 2/HEADSET light on
the telephone base is off.
Discoverable mode - before a
Bluetooth enabled device can be paired,
it must be set to this mode. When
pairing your cell phone, the telephone
base will be set to this mode. Depending
on the manufacturer, this mode is
sometimes referred to as Find Me or
Visibility.
Home line - your conventional
telephone land line. On your DS6621
handset, press /HOME/FLASH to use
the home line.
Paired device - once a Bluetooth
enabled cell phone has been paired
with the telephone base, it appears
on the cell devices list. A maximum of
two cell phones can be paired with the
telephone base.
Pairing - this refers to the process of
Bluetooth enabled cell phone registering
device information with each other.
The telephone base must be paired
with the Bluetooth enabled cell phone
before it can be used. Depending on the
manufacturer, this is also referred to as
Bonding.
PIN - by default, the PIN is 0000 for the
telephone base and for most Bluetooth
devices. PIN information must be
exchanged between Bluetooth devices
before they can be used. This is also
known as a Passkey or Passcode.
To Next Page
Loading...
Need help?
General
