VTech DS662V-1F User Manual

29
Call block
If you subscribe to caller ID service, you
can set the telephone to block unknown
calls and certain undesired calls.
The call block list stores up to
20 entries.
When a home line call is blocked,
you will hear a simulated busy tone
for one ring cycle. You may pick up
the call during the first ring or at the
time when the simulate busy tone is
played. If you do not pick up the call,
it will be disconnected. When a cell
call is blocked, the call will be rejected
immediately.
Block unknown calls
All incoming calls with unknown
numbers will be blocked.
Press MENU when the phone is not
in use.
Press or to highlight Call block,
and then press SELECT.
Press or to highlight
Calls w/o num, and then press
SELECT.
Press or to choose Not block or
Block, then press SELECT. You hear
a confirmation tone.
-OR-
To block calls without number, press
MENU and then enter 666261
when the phone is not in use.
To unblock calls without number,
press MENU and then enter
666262 when the phone is
not in use.
1.
2.
3.
4.
•
•
Add a call block list entry
Press MENU when the phone is not
in use.
Press or to highlight Call block,
and then press SELECT.
Press or to highlight Block list,
and then press SELECT.
Press or to highlight Add new
entry, and then press SELECT.
When Enter number displays, use
the dialing keys to enter a number
(up to 30 digits).
-OR-
Copy a number from the redial list by
pressing REDIAL. Then press , or
REDIAL repeatedly to find the desired
number. Press SELECT to copy the
number.
6. Press SELECT to move on to the name.
7. When Enter name displays, use
the dialing keys to enter a name (up
to 15 characters). Each time you
press a key, the character on that
key appears. Additional key presses
produce other characters on that key.
Press the key repeatedly until the
desired character appears. The first
character of every word is capitalized.
8. Press SELECT to save. The handset
displays Saved and then returns
to the previous menu. You hear a
confirmation tone.
While entering names and numbers,
you can:
Press or to move the cursor
to the left or right.
Press DELETE to erase a digit.
Press and hold DELETE to erase
all digits.
Press and hold PAUSE to enter a
dialing pause (a p appears).
Press 0 to add a space.
1.
2.
3.
4.
5.
•
•
•
•
•

VTech DS662V-1F Specifications

General

Brand	VTech
Model	DS662V-1F
Category	Cordless Telephone
Language	English