VTech DS662V-1F User Manual

12
Bluetooth setup
To use a Bluetooth enabled cell phone
with your DS6621, you must first pair and
connect it with the telephone base. All
DS6621 handsets can be used to make or
answer on the cell phone line.
Bluetooth wireless technology operates
within a short range (30 feet). When
you pair a Bluetooth cell phone to the
telephone base, move closer to the
telephone base to maintain sufficient
signal strength. For optimal performance,
keep your cell phone within 15 feet of the
telephone base while using the cell line.
VTech Connect to Cell
TM
application
If you are using Bluetooth enabled
Android
®
phones (OS 2.3 or higher), you
can further extend the flexibility of your
telephone system with use of this
free application.
VTech Connect to Cell comprises
Caller ID manager and Alerts manager
that help you integrate your cell phone
with your new DS6621.
To learn more
or download this
application via Google
Play
®
Store, Scan the
QR code on the right, or
go to
http://www.vtechphones.com/app_connect_to_cell.
Android
®
and Google Play
®
are registered
trademarks of Google Inc.
Add a Bluetooth enabled cell
phone
Before you begin, make sure that
you have cellular coverage and your
Bluetooth enabled cell phone is not
connected to any other Bluetooth
devices. Refer to your cell phone user's
manual to learn how to search for or
add new Bluetooth devices.
All paired cell phones are shown on the
cell devices list.
Once you have paired and connected a
device with the telephone base, you do
not need to repeat the procedure again
unless you want to replace the existing
paired cell phone with a new one.
To pair and connect a cell phone:
Choose a slot to pair the cell phone.
Press and hold CELL 1 and/or
CELL 2/HEADSET on the
telephone base for about four
seconds until the CELL 1 and/or
CELL 2/HEADSET light flashes.
If there is already a cell phone in
the slot, the existing cell phone will
be erased from cell devices list.
Turn on the Bluetooth feature of
your cell phone. Once your cell
phone finds your VTech phone
(VTech DS6621), press the
appropriate key on your cell phone to
continue the pairing process.
Your cell phone may prompt you to
enter the PIN of the telephone base.
The default PIN of the telephone
base is 0000.
All cell phones that are connected to
the telephone base are disconnected
temporarily until the pairing process
is complete.
1.
•
2.
•
•

VTech DS662V-1F Specifications

General

Brand	VTech
Model	DS662V-1F
Category	Cordless Telephone
Language	English