9
Getting started
Deskset installation
6. It takes up to 60 seconds to complete the connection. The screen displays
Connected to Console (Console represents the name of the console)
when the connection is successful.
• If the deskset displays Please check: 1. Console’s name and network
info 2. Ethernet, make sure you enter your console’s name correctly and
the Ethernet switch or router is installed properly. Repeat steps 3-5 above
to connect to console again.
7. The deskset displays Starting... It takes a while
for the system to finish the startup and the deskset
enters idle screen when the startup is done.
8. Lift the handset. If you hear a dial tone, the
installation was successful.
NOTES:
• If the connection is not successful, the deskset returns to the previous screen. Try the
connection process again.
• Make sure you assign a unique extension number to the deskset.
• If you want to replace a deskset and keep the same extension number, release its
extension number after disconnected from the console. See Release extension number
in the online complete user’s manual of your UP416 console.
Starting...
To Next Page
Loading...
Need help?
General
