VTech First Order Stormtrooper User Manual

18
(iv) Auto Screen O
Allows you to set the Auto Screen O timer. Tap the left and the right
arrow for selection, then tap the Check icon to confirm.
The selection Disable Auto Screen O will not turn o the screen,
but the screen will dim if there is no input for 30 seconds in Clock
Display mode to save power. At this time, operation of the watch will
be limited to showing the time. No other function will be operational,
including 3D-style clock face eects.
Tips: If the Auto Screen O time is set to one of the longer times,
the battery consumption will increase and the time the battery lasts
between charging will be reduced.
(v) Indoor Light Frequency
Here you can set the AC power frequency according to the region
you'reinwhiletravelling.Ifitisnotsetcorrectly,youmayseesome
flickering on the camera/video preview screen and the captured
photos and videos when used in artificial lighting conditions.
(vi) Factory Reset
Factory Reset will erase the contents stored in the memory and
reset all system settings to factory default. Follow the instructions on
screen to confirm the action.
Care & Maintenance
1. KeeptherubbercoveroftheMicro USB Port closed tightly while it is
not in use in order to prevent dirt or water from getting inside.
2.Keepthewatchcleanbywipingitwithaslightlydampcloth.
3.Keepthewatchoutofdirectsunlightandawayfromanydirectheat
source.
4. Do not drop the watch on a hard surface and do not expose it to
moisture or immerse it in water.
5.Keepthelensclean.Ifthepicturestakenareblurry,itcouldbebecause
there is dirt on the lens. You can clean the lens by:
 •Blowingonthelens.
 •Gentlywipingthelenswithadrycloth.

VTech First Order Stormtrooper Specifications

General

Brand	VTech
Model	First Order Stormtrooper
Category	Watch
Language	English