How to fix VTech ia5847 Cordless Telephone battery that won't charge?
If the battery in your VTech Cordless Telephone handset isn't charging, make sure the handset is correctly placed in the charger and that the CHARGE light is on. Remove the battery and install it in the spare battery compartment on the side of the base for 16 hours. If the CHARGE light remains off, consult the section addressing that issue.
Why are my caller ID features not working properly on my VTech ia5847?
Caller ID is a subscription service from your local telephone company. The caller may be calling from an area which does not support caller ID. Both you and the caller’s telephone companies must use equipment which are compatible with caller ID service. If you subscribe to DSL service, install a DSL filter to the telephone line between the telephone base and the telephone line jack. Contact your DSL service provider for filter information.
Why caller ID entries don't match numbers I need to dial on VTech ia5847?
When Caller ID entries do not match the numbers you need to dial on your VTech Cordless Telephone, you can change the number of digits that you dial or store from the call log. While reviewing the call log, press # repeatedly to display dialing options for local and long distance numbers before dialing or saving the telephone number.
Why there is no dial tone on my VTech ia5847 Cordless Telephone?
First, try all the above suggestions. Move the cordless handset closer to the telephone base. It might be out of range. The telephone line cord might be malfunctioning. Try installing a new telephone line cord. Disconnect the telephone base from the telephone jack and connect a different telephone. If there is no dial tone on the telephone either, the problem is in your wiring or local service. Contact your local telephone company.
Why VTech ia5847 handset doesn't ring?
If your VTech Cordless Telephone handset isn't ringing when you receive a call, first ensure the ringer is activated. Check that the telephone line cord is firmly plugged into both the base and the wall jack, and that the power cord is plugged in. You might be too far from the base. Fully charge the handset for 16 hours, returning it to the base when not in use. Too many extension phones on the line can prevent ringing, so try unplugging some. The layout of your home or office can limit the operating range, so try moving the base to an upper floor. If other phones have the same issue, the problem lies with your wiring or local service, requiring you to contact your telephone company. Testing with another phone at the jack can isolate a jack problem. Also, keep the phone away from other ele...
Connects the base and charger to power and telephone line.
Selects an optimal location for the telephone base for performance.
Guides on installing the battery into the handset.
Verifies the phone has a dial tone after setup.
Instructions on charging the handset battery for the first time.
Identifies and describes the buttons and features on the handset.
Solutions for when the phone is completely non-functional.
Troubleshooting steps for the low battery indicator.
Solutions for battery charging issues.
Solutions for when no dial tone is available.
Troubleshooting steps for incoming call ringing issues.
Troubleshooting steps for handset ringing issues.
Solutions for issues preventing dialing out.
Troubleshooting for issues with Caller ID functionality.
Solutions for missing or delayed Caller ID information.
Solutions for a cordless handset that beeps and malfunctions.
General| Brand | VTech |
|---|---|
| Model | ia5847 |
| Answering System | Yes |
| Caller ID | Yes |
| Speakerphone | Yes |
| Handsets Included | 1 |
| Call Waiting | Yes |
| Intercom | Yes |
| Backlit Display | Yes |
| Type | Cordless Phone |
| Expandable | Yes |
| Headset Jack | Yes |
To Next Page
