8
Setup
Getting Started
Installation of Battery in Handset
Follow the steps below:
1. Place the new battery in the Hand-
set with the positive and negative
poles aligned in the battery com-
partment.
2. Replace the battery compartment cover
by sliding it upwards.
3. If the new battery is not already charged,
place the Handset in its Charger or Base
Unit, and allow it to charge for 10-12
hours. After initial charge, a maintenance
charge of 8 hours should be sufficient.
Charging of the Handset Battery
The Handset of your cordless telephone is powered by a rechargeable battery. It
charges automatically whenever the Handset is in its charger or Base Unit.
You should charge the battery for 10-12 hours when you first receive your
phone.
You will know the battery needs charging when:
• The low battery message is displayed:
• The Handset seems completely dead, the LCD
is completely clear and does not activate when
you press the keys.
NOTE: When in LOW BATTERY mode, the keypad sounds, backlighting and
speakerphone features will not work. When your battery has been charged,
your features will return to their normal function.
IMPORTANT:
1. Do not dispose of the battery in a fire, it might may explode.
2. Do not open or mutilate the battery. Toxic substances may be released,
causing harm to eyes or skin.
3. Exercise care in handling battery in order to prevent an accidental short of
the charge contacts, potentially causing the battery to overheat.
4. Do not dispose of this battery into household garbage, it should be properly
recycled.
5. Do not charge the battery with other electrical devices.
To Next Page
Loading...
Need help?
General
