VTech IS8128 User Manual

110
Answering system settings
Set your built-in answering system
The answering system can record and
store up to 99 messages. Each message
can be up to three minutes in length.
The total storage capacity for the
announcement, messages and memos
is approximately 22 minutes. The actual
recording time depends on individual
message characteristics.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to set
number of rings before pick up, and to
access remotely.
Voice guide to set up answering system
This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide
to record your own announcement, set
the number of rings, and set the message
alert tone.
To use the voice guide feature:
1. Press MENU/SELECT on the telephone
base in idle mode.
2. Press q CID or p to scroll
to Answering sys, then press
MENU/SELECT.
3. Press q CID or p to scroll to Voice
guide, then press MENU/SELECT. You
hear a voice prompt, “This voice guide
will assist you with the basic setup of
your answering system.“
4. Set up your answering system by
inputting designated numbers, as
instructed in the voice guide.
NOTES
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time, and Smart call blocker. After
these settings are done or skipped,
the telephone base then prompts
if you want to set up the answering
system via voice guide. Press
MENU/SELECT to start the setup.

VTech IS8128 Specifications

General

Brand	VTech
Model	IS8128
Category	Cordless Telephone
Language	English