VTech IS8128 User Manual

57
while you use the IS8128/IS8128-2/
IS-8128-3/IS8128-4/IS8128-5 cell
line. For optimal performance, the
cell phone must be within 15 feet of
the telephone base.
• If you experience poor sound quality,
it may be caused by the distance
between your cell phone and the
telephone base. To improve the
performance, place your cell phone
closer to the telephone base (within
15 feet) and make sure that there are
no physical obstacles such as large
furniture or thick wall in between.
• Charge your cell phone while it is
connected to the telephone base.
Your cell phone’s battery discharges
faster while it is connected to the
telephone base via Bluetooth
wireless technology.
• Monitor your cell phone’s usage,
because minutes may be deducted
from your cellular plan for the
duration of all cell calls, depending
on the terms of your plan.
Refer to the Bluetooth Setup section
to learn how to set up your Bluetooth
device. Refer to the telephone
operation on how to operate your
Bluetooth devices with your new
IS8128/IS8128-2/IS-8128-3/IS8128-4/
IS8128-5/IS8129/IS8129-2/IS-8129-3/
IS8129-4/IS8129-5 telephone system
with Bluetooth wireless technology.
Refer to the Bluetooth setup section
to learn how to set up your Bluetooth
device. Refer to the Telephone
operation section on how to operate
your Bluetooth devices with your new
telephone system with Bluetooth
wireless technology.
Glossary of terms
Below are some terms used in this user’s
manual to help you become familiar
with using your Bluetooth devices and
your new VTech telephone system.
Active device slots - the Device list has
two active slots for two cell phones, or
one cell phone and one headset. In
order to use a Bluetooth device on a
call, it must be in an active slot and be
connected.
Bluetooth cell phone - refers to a mobile
Bluetooth enabled cellular telephone.
CELL line - the telephone line associated
with your cell phone service. Press
CELL on your handset or telephone
base to use the cell line.
Connected - when you pair a Bluetooth
device to your telephone system, it is
placed in an active slot and automatically
connected. When a device is connected,
a 1 and/or 2 will display after on
the telephone base screen. Also, the
CELL 1 and/or CELL 2/HEADSET light
on the telephone base will be on. If
a device loses its connection to the
telephone base, it must be reconnected
before you can use the device with the
telephone system.

VTech IS8128 Specifications

General

Brand	VTech
Model	IS8128
Category	Cordless Telephone
Language	English