VTech IS8128 User Manual

37
Join a call in progress
Another handset or the telephone
base can join you on home call. The call
continues until all parties hang up. You
can share an outside call with up to two
system devices.
• When a handset or telephone
base is already on a call, press
HOME/FLASH or on another
handset to join the call.
-OR-
When a handset is already on a call,
press HOME on the telephone base
to join the call.
• Press OFF/CANCEL or place the
handset in the telephone base or
handset charger to exit the call. The
call continues on the other handset
until both handsets hang up.
-OR-
Press HOME on the telephone base
to exit the call. The call continues on
the other handset until both devices
hang up.
NOTE
• If you have paired a DECT 6.0 cordless
headset to the telephone base, you
can also join a call in progress using
the paired device. Refer to the user’s
manuals of the respective product
for more information.
Find handset
This feature helps you find all system
handsets.
CAUTIONS
• Do not press and hold FIND HS for
more than four seconds. It may lead
to handset deregistration.
• If the handset displays To register HS...
and ...see manual, refer to Frequent
asked questions to register the handset
back to the telephone base.
To start paging
• Press FIND HS on the telephone base
when it is not in use. All idle handsets
ring and display **Paging**.
To end paging
Press HOME/FLASH, CELL,
OFF/CANCEL or on the handset.
-OR-
• Press FIND HS again on the telephone
base.
-OR-
• Place the handset in the handset
charger.
NOTE
• If you press MUTE/DELETE/VOICE on
a handset, the ringer of that handset
is silenced but the paging tone
continues on the other handsets.

VTech IS8128 Specifications

General

Brand	VTech
Model	IS8128
Category	Cordless Telephone
Language	English