11
POWER ADAPTOR CONNECTION
• Make sure the unit is turned OFF and ensure no batteries remain
inside the unit.
• Locate the 3.5mm DC Jack on the side of the unit.
• Connect the power adaptor (sold separately) into the unit’s 3.5mm
DC Jack.
• Insert the other end of the power adaptor into a plug socket.
• Make sure the plug socket switch is ON and then turn the unit ON.
TRANSFORMER SAFETY NOTICE
• Using a VTech
®
3.5mm DC 6V power adaptor (sold separately) is
recommended.
• This toy should only be used with a transformer for toys.
• The transformer is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
• Never clean a plugged in toy with liquid.
• Please regularly examine the transformer, checking for damage to
the cord, plug, transformer or other parts. Do not use the transformer
if there is any damage to it.
NOTE: If the unit stops working or the sound becomes weak, it may be
because of a fault with the power adaptor connection.
Turn the unit OFF and unplug the adaptor for 15 seconds. Then plug
the adaptor back in and turn the unit ON. If the problem persists, the
adaptor you are using may be faulty.
TO BEGIN USING
KIDI SUPER STAR
®
LIGHT SHOW
TURN ON THE UNIT
Press the ON/OFF Button to turn the unit ON and enter normal play
mode.
LOW BATTERY ICON
When the batteries are exhausted, the low battery icon will be
To Next Page
Loading...
Need help?
General