7
1 Light Sensor
2 Camera Lens
3 Infrared LEDs
• Allow you to see clearly in a dark environment.
4 Microphone
5 Night Light
6
Night Light Control Key
• Go to Night Light section to learn more.
7 ON/OFF Switch
• Power it on or o.
8 LED Indicator
• Red is steadily on when the baby unit is connecting to the parent unit in direct mode.
• Green is steadily on when the baby unit is connected in Wi-Fi router mode.
• Red ashing slowly during video streaming in direct mode.
• Green ashes slowly during video streaming in Wi-Fi router mode.
9 Speaker
10 Temperature Sensor
11 PAIR
• The parent unit and baby unit(s) provided are already paired.
• Press and hold for three seconds to enter pairing mode.
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear a beep sound.
2. Release the PAIR key, and then press the PAIR key again ve times until you
hear another beep sound.
3. The baby unit will sound another beep when the reset completes. Then, the baby
unit will reboot.
12 Power Jack
13 Wall Mount Slots
To Next Page
Loading...
Need help?
General
