VTech Star Wars Stormtrooper BB-8 - Troubleshooting Common Problems; Watch Not Responding; Screen Display Issues; Image Quality and Connectivity

21
TROUBLESHOOTING
Go through this section if you experience diculty in operating VTech
®
Star Wars
TM
Camera Watch.
Problem Solution
The watch
has stopped
working
1. Turn the MASTER POWER SWITCH OFF for 30
seconds.
2. Turn the MASTER POWER SWITCH ON again and
then press the HOME BUTTON to activate the
watch. It should now work properly.
3. If it doesn't work, recharge the battery and try
again.
(Refer to the battery recharging section for details)
Screen display
is abnormal
1. Turn the MASTER POWER SWITCH OFF for 30
seconds.
2. Turn the MASTER POWER SWITCH ON again and
then press the HOME BUTTON o activate the
watch. The screen display should be normal again.
Image taken is
not clear
1. Make sure the lighting conditions of the shooting
environment are good.
2. Check to see if the camera lens is clean. If you find
some dirt on it, please see the steps to clean the
lens in Care and Maintenance.
Cannot
connect to
computer
• ChecktheconnectionsontheUSBcablebetween
the watch and the computer and review the
appropriate connection procedures in this manual.
• Turn the MASTER POWER SWITCH OFF for 30
seconds.
• TurntheMASTERPOWERSWITCHONandconnect
to the computer again.
TROUBLESHOOTING