VTech T2351 - Handset Ringer Style;Battery Save; If You Subscribe to DSL Service

www.vtechphones.com
8
GETTING STARTED
Installation
• The minute is ashing. Press or until the screen displays the correct minute. Press SELECT.
• AM or PM is ashing. Press or to choose between AM or PM. Press SELECT
Handset Ringer Style/Battery Save
You can select from four different handset ringer styles, or turn the ringer off and extend the
battery life.
• With the handset in idle (off) mode, press PROG.
• Press or until the screen displays RINGER: and the current setting.
• Press SELECT. The current setting blinks, and you will hear a sample of the ring.
• Press or to select RINGER: 1, 2, 3, 4 or OFF. You will hear a sample of each ring tone.
• Press SELECT.
• In the event of a
power outage, or
if your phone’s
power cord is
unplugged, the
time setting will be
lost.
If you subscribe to DSL service:
If you hear noise during conversations and/or your
caller ID features aren’t functioning properly, install
a noise lter to the telephone line between the base
unit and the telephone line jack. Contact your DSL
provider to obtain a noise lter.
To single telephone jack (RJ11C)
Telephone line cord
Noise lter
(For xDSL users)