!
Base Settings
The v 2651 Base unit has several settings that can be adjusted according
To your preference and system requirements.
Select Base Ringer Melody:
Select Base Ringer Volume (and Volume OFF):
• The phone must be off.
• Press the star key three times ( ). The Base will emit a happy
tone and the IN USE LED will flash.
• Press the VOLUME to adjust the Base Ringer volume. After each
press of the volume keys, the Base will emit the selected Ringer and volume
setting for one second.
• To turn the Base ringer OFF, press the VOLUME until
the ringer
preview cannot be heard.
• To save the Ringer Volume selection ( and exit ) press # .
• To exit without saving press .
• The phone must be off.
• Press the star key three times ( ). The Base will emit a happy
tone and the IN USE LED will flash.
• Press the 1,2,3,4,5, or 6 keys to select the Ringer Melody. After each key
press, the Base will emit a 1- second preview of the selected ringer.
• To save the selected ringer (and exit) press # .
• To exit without saving press .
***
*
***
*
Basic Operation
To Next Page
Loading...
Need help?
General
