VTech VCS754 - Page 100

Configuration File Parameter Guide 100 Back to Contents
VCS754 Administrator and Provisioning Manual
Setting: provisioning.dhcp_option_enable
Description: Enables or disables using DHCP options for locating the configuration
and firmware files.
Values: 0 (disabled), 1 (enabled) Default: 1
Setting:
provisioning.dhcp_option_priority_1
Description: Sets the first priority DHCP option for the provisioning/firmware file
check.
Values: 66, 159, 160 Default: 66
Setting:
provisioning.dhcp_option_priority_2
Description: Sets the second priority DHCP option for the provisioning/firmware file
check.
Values: 66, 159, 160 Default: 159
Setting:
provisioning.dhcp_option_priority_3
Description: Sets the third priority DHCP option for the provisioning/firmware file
check.
Values: 66, 159, 160 Default: 160
Setting:
provisioning.resync_mode
Description: Sets the mode of the device's provisioning/firmware file check. This
determines which files the device retrieves when the resync process
begins.
Values: config_only, firmware_only,
config_and_firmware
Default: config_and_firmware
Setting:
provisioning.bootup_check_enable
Description: Enables or disables bootup check for configuration and firmware files.
Values: 0 (disabled), 1 (enabled) Default: 1