1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to choose Answering sys, and then press MENU/SELECT.
3. Press ▼ CID or ▲ to choose Ans sys setup, and then press MENU/SELECT.
4. Press ▼ CID or ▲ to highlight Remote code, then press MENU/SELECT.
5. Use the dialing keys to enter a two-digit number.
-OR-
Press ▼ CID or ▲ to scroll to a desired two-digit number.
6. Press MENU/SELECT to confirm.
Screen calls | Call screening
Turn on or off the call screening
Use this feature to choose whether incoming messages can be heard while they are being recorded.
Using a cordless handset or telephone base:
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to scroll to Answering sys then press MENU/SELECT to select.
3. Press ▼ CID or ▲ to scroll to Ans sys setup then press MENU/SELECT to select.
4. Press MENU/SELECT to choose Call screening.
5. Press ▼ CID or ▲ to choose On or Off.
6. Press MENU/SELECT to save.
• You hear a confirmation tone.
Alert setting
Turn on or off the message alert tone
When the message alert tone is set to on, and there is at least one new message, the telephone base beeps
every 10 seconds. The message alert tone is preset to off.
Using a cordless handset or telephone base:
1. Press MENU/SELECT when the phone is not in use.
2. Press ▼ CID or ▲ to scroll to Answering sys then press
MENU/SELECT to select.
3. Press ▼ CID or ▲ to scroll to Ans sys setup then press MENU/SELECT to select.
4. Press ▼ CID or ▲ to scroll to Msg alert tone then press MENU/SELECT to select.
5. Press ▼ CID or ▲ to choose On or Off.
6. Press MENU/SELECT to save.
• You hear a confirmation tone.
NOTES
The answering system must be turned on for the message alert tone to be functional.
To Next Page
Loading...
