EasyManua.ls Logo

VTOMAN V8 Pro - Usage Restrictions and Charging Safety

VTOMAN V8 Pro
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19. Do not use the clamps to power other equipment.Before
starting, make sure there is no rust and foreign matter at the
interface, and tightly connect the device with the jump clamps.
20. Non-tight connection will affect the starting performance of the
device.
21. Do not use the device to start the car while it is being charging.
22. Do not use the device to continuously start the car more than 3
times.It may cause the product to overheat and damage the
product. Each starting should be separated by two minutes.
23. After successfully starting, please remove the product from the
car battery within 30s, otherwise it may cause damage.
24. Do not charge the device immediately after use it to start the car
successfully.
25. Please charge it in the environment temperature between
0C~45C.
26. Please use the comes with wall charger or the same specification
charger to charge the device.
27. In extreme cases, the battery may leak. Do not touch the liquid
directly with your hands or skin. If you accidentally touch it, rinse it
off immediately with soap and water. If you accidentally get into
your eyes, rinse your eyes with cold water for at least 10 minutes and
seek medical attention immediately.
28. If the product battery leaks, please recycle it with the appropriate
equipment immediately.

Related product manuals