OPERATING INSTRUCTIONS
(Keep the "ON/OFF" switch "ON" before you use the device.)
How to charge VTOMAN V8 Pro With Wall Charger
1.Plug the wall charger into the 15V/1A input port of the device.
2. Plug the wall charger into the universal input socket
(100-240V).
JUMP STARTING A VEHICLE
50%
1.Make sure the unit is over 50% charged
(check the battery indicator> 2 bars).If the
device has not been used for over two
months please charge it first.
2.Attach the intelligent jumper cable to this
device.
3.Connect the jump clamps to the car
battery: attach the red clamp to the positive
terminal (+) and the black clamp to the
negative terminal (-).
To Next Page
Loading...
