4.Start your vehicle. If your vehicle doesn't
start, or if you observe a red light or hear
buzzing, please consult the troubleshooting
section on the next page.
5.After the car is starting, remove the
jumper cable from the battery.
GREEN LIGHT ON: The Connection is correct,
ready to start your car.
Check the indicators on the jumper cable, and operate in
accordance with the instructions below:
RED LIGHT WITH BUZZING：This indicates that
the terminals have been connected to the wrong
polarity of the battery. Please follow step 3 to
reconnect them until the green light is on before
attempting to start the engine.
To Next Page
Loading...
