7.2 Display Signal Source
You can operate and manage all the input signal source contents through
professional control software, and display these signal source contents on the LCD
display panel.
For more information about control software configured onsite and its operation
instructions, please consult the system/equipment administrator.
8. Daily Maintenance
Precautions for maintenance
There is high voltage inside the equipment. The chassis shall be opened by the
specialized technician only.
This product is a precise device, and you are not allowed to open, disassemble or
modify on your own. Otherwise, the LCD or other internal components may be
damaged, making the equipment unusable.
The LCD surface shall be kept clean during the use and storage. If any water drip
is retained on the LCD, it will result in discolor or stain of the LCD. When there is
any stain on the LCD, wipe it off with cotton or soft cloth. It is prohibited to use
gasoline, alcohol or other chemicals to clean the screen.
If the screen is damaged and the liquid crystal drops onto your hands or clothes,
wash it with soap and clean water.
Do not press the screen surface of the LCD display panel forcefully.
To Next Page
Loading...