User Manual VTRON LCD Display Panel
Locate the panel in the place with good ventilation, moderate temperature and free
from dampness and direct sunshine.
The opening on the enclosure is used for the
heat dissipation of the components inside.
Pay attention not to block the openings when
locating the unit.
Do not place the unit inside any embedded equipment, unless there is any good
ventilation device.
To avoid the falling of the panel, do not place the
panel on any uneven surface.
Do not use the panel near the water source, in the
damp basement or other similar environment.
To avoid unnecessary accidents, please cut off
the power supply during lightning storms.
To Next Page
Loading...