VuPoint FC-C520-VP - Film Type Configuration; Formatting Storage Media; TV Output Setup

• Home
Press the Start button to return to capture mode.
• Film Type
To change the Film Type, you can use the Left or Right buttons to navigate
the function menu, press the Start button to enter.
Slide: Select the Slide mode when scanning colored slides. Press the Start button
to confirm selection.
Monochrome: Select the Monochrome mode when scanning black and white negatives.
Press the Start button to confirm selection.
Negative: Select the Negative mode when scanning colored negatives. Press the
Start button to confirm selection.
• Format
To enter the Format mode, press the Left or Right buttons to select, and press
the Start button to enter.
Select ‘”do not format” (X) or “format” (√).
Then press the Start button to confirm your selection.
Caution: Formatting will delete all files on internal memory as well the on the SD card. Formatted
files cannot be recovered!
• TV Output
Connect the converter to a TV with the video cable provided for optional viewing purposes. If you
connect the converter to a TV, the images on the LCD monitor will not appear.
NTSC: Sets the TV Output to NTSC. (Video format in America and Asia)
PAL: Sets the TV Output to PAL. (Video format in Europe)