54
5.Slide and Negative holder loading method
Loading Negatives
a.Hold up the negative toward the light.
Face the righ side of the slide of the
negativ to yourself
b.Take out negative holder out. Let the
side with “open” logo face yourself,
and let the side with “ ”logo face
down. Open the negative holder,
then place negative into recessed
area in the holder.
c.Close the negative holder and press
the edges so that it locks in place
d. Insert the negative holder into the
slot on the right side of the film
scanner as shown.
a.Hold up the slide toward the light. Face
the righ side of the slide to yourself.
(we don't provide white small holder)
b.Take out slide holder out. Let the side
with “open” logo face yourself, and let
the side with “ ”logo face down.
Open the slide holder, then place
slides into recessed area in the
holder.(films also could be loaded as
a strip into the slide holder, forming
drawer type as below picture)
c.Close the slide holder and press the
edges so that it locks in place
d. Insert the slide holder into the slot
on the right side of the film scanner
as shown.
ENTER
MENU
SCAN
Film
Photo
TV OUT
ENTER
MENU
SCAN
Film
Photo
TV OUT
:Handle films with care to avoid scrathes or finger prints(for
the best use cotton gloves when handling films)It is
recommended to use compressed cotton to remove any dust
on the films.
!
To Next Page
Loading...
