vwr.com I Instruction manual VWR Micro Star 21
81 / 87
Chemical Compatibility
Chemical Compatibility
MATERIAL
CHEMICAL
Aluminium
Anodic Coating for Aluminum
Buna N
Cellulose Acetate Butyrate
Polyurethane Rotor Paint
Composite Carbon Fiber/Epoxy
Delrin™
EPDM rubber
Glass
Neoprene
Noryl™
Nylon
PET¹, Polyclear™,Clear Crimp™
Polyallomer
Polycarbonate
Polyester, Glass Thermoset
Polythermide
Polyethylene
Polypropylene
Polysulfone
Polyvynil Chloride
Rulon A™, Teflon™
Silicone Rubber
Stainless Steel
Titanium
Tygon™
Viton™
rubidium bromide M S S / S S S / S S S S S S S / / S S S S S S M S S S
rubidium chloride M S S / S S S / S S S S S S S / / S S S S S S M S S S
sucrose M S S / S S S S S S S S S S S S S S S S S S S S S S S
sucrose, alKaline M S S / S S S / S S S S S S U S S S S S S S S M S S S
sulFosalicylic acid U U S S S S S / S S S U S S S / S S S / S S S U S S S
nitric acid (10%) U S U S S U U / S U S U / S S S S S S S S S M S S S S
nitric acid (50%) U S U M S U U / S U S U U M M U M M M S S S U S S M S
nitric acid (95%) U / U U / U U / / U U U U M U U U U M U U S U S S / S
hydrochloric acid
(10%)
U U M S S S U / S S S U U S U S S S S S S S S U M S S
S Satisfactory
m Moderate attack, may be satisfactory for use in centrifuge depending on length of exposure, speed involved, etc.; suggest testing under actual
conditions of use
u Unsatisfactory, not recommended
/ Performance unknown; suggest testing, using sample to avoid loss of valuable material