VWR avantor Micro Star 21 - Page 82

vwr.com I Instruction manual VWR Micro Star 21
82 / 87
Chemical Compatibility
Chemical Compatibility
MATERIAL
CHEMICAL
Aluminium
Anodic Coating for Aluminum
Buna N
Cellulose Acetate Butyrate
Polyurethane Rotor Paint
Composite Carbon Fiber/Epoxy
Delrin™
EPDM rubber
Glass
Neoprene
Noryl™
Nylon
PET¹, Polyclear™,Clear Crimp™
Polyallomer
Polycarbonate
Polyester, Glass Thermoset
Polythermide
Polyethylene
Polypropylene
Polysulfone
Polyvynil Chloride
Rulon A™, Teflon™
Silicone Rubber
Stainless Steel
Titanium
Tygon™
Viton™
hydrochloric acid (50%)
U U U U S U U / S M S U U M U U S S S S M S M U U M M
sulFuric acid (10%)
M U U S S U U / S S M U S S S S S S S S S S U U U S S
sulFuric acid (50%)
M U U U S U U / S S M U U S U U M S S S S S U U U M S
sulFuric acid (conc.)
M U U U / U U M / / M U U S U U U M S U M S U U U / S
stearic acid S / S / / / S M S S S S / S S S S S S S S S M M S S S tetrahydroFuran S S U U S U U M S U U S U U U / M U U U U S U S S U U toluene S S U U S S M U S U U S U U U S U M U U U S U S U U M S Satisfactory m Moderate attack, may be satisfactory for use in centrifuge depending on length of exposure, speed involved, etc.; suggest testing under actual
conditions of use
u Unsatisfactory, not recommended / Performance unknown; suggest testing, using sample to avoid loss of valuable material