VXi VoxStar
™
User Guide PAGE 9
ON / STANDBY / OFF
Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt
(in English), “Power on.” The blue light will flash twice every second.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the
last device that it was paired with, putting itself into Standby Mode. (The headset can also be put into
Standby Mode with a quick press and release of the MFB). The blue light will flash indicating an active
Bluetooth link. The headset will give a voice prompt (in English), “Your headset is connected.”
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 3-4 seconds until
you hear a voice prompt (in English), “Power off.” A red light will flash 4 times and the headset will
turn off.
To Next Page
Loading...
Need help?
General
