6
Important Information
2 Safety Information
Provisions for a safe work environment
Only trained and qualifi ed auto technicians and auto mechanics may carry out work on the vehicle.
Read this publication carefully.
Follow all warnings, notices and instructions to avoid personal injury and property damage.
Always abide by the vehicle manufacturer’s specifi cations and instructions.
Observe all accident regulations of the respective company as well as regional and national regulations.
The workplace should be dry, suffi ciently lit and ventilated.
Use personal protective equipment if required (safety shoes, protective goggles, respiratory protection
and ear protectors).
Read and observe all Danger, Warning and Caution hazard alert messages in this publication. They provide
information that can help prevent serious personal injury, damage to components, or both.
WARNING
To prevent serious eye injury, always wear safe eye protection when you perform vehicle
maintenance or service.
WARNING
Park the vehicle on a level surface. Block the wheels to prevent the vehicle from moving. Support the
vehicle with safety stands. Do not work under a vehicle supported only by jacks. Jacks can slip or fall
over. Serious personal injury and damage to components can result.
3 Important Information
Use only genuine WABCO components. Other manufacturers’ parts are not designed for use with a
WABCO ABS system and may not function correctly.
WABCO recommends that a control line fi lter, part number 432-500-005-0, be installed on the air system’s
control line, upstream of the ABS ECU/valve assembly.
To Next Page
Loading...
