EasyManua.ls Logo

WAC HUG - Controlling the Fan; Wall and Remote Control Functions; Pairing and Unpairing Controls; Fan Speed and Tone Indicators

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
14 15 16
A
A
B
B
C
C
Your fan was delivered to you with the included control already
paired to your fan. You will need to remove the pull-tab to begin
using your remote control.
A: Light On/O, Bright/Dim
B: Fan On/O, Speed Up/Down
C: Season (Summer/Winter)
Air-Gap Switch: Pull tab to power o in case of emergency.
Not necessary for normal fan operation (only included with
wall control).
Air-Gap
Switch*
Pairing
Press and hold buttons
for 10-15 seconds.
Wall Control
* Air-Gap Switch only included
with wall control
Remote
Control
Unpairing
To purge, press and hold
buttons for 4 seconds.
Summer Mode
(Counter-Clockwise)
Winter Mode
(Clockwise)
NOTE: Your fan features 6 speeds. An audible tone will indicate
when the speed is increased or decreased. When the fan has
reached the minimum/maximum speed level the fan will beep
twice.
NOTE: Pairing must be completed within 3 minutes of turning
the power on to the fan receiver.
CONTROLLING THE FAN 12

Related product manuals