BA 901/1101 en – Edition 2.1 * 91101b530.fm 5-31
Maintenance
Inside the cabin
Never use high-pressure cleaners, steam jets or high-pressure water to clean
inside the cabin. Water under high pressure can
• penetrate into the electrical system and cause short circuits and
• damage seals and disable the controls!
We recommend using the following aids to clean the cabin:
• Broom
• Vacuum cleaner
• Damp cloth
• Bristle brush
• Water with mild soap solution
Cleaning the seat belt:
• Clean the seat belt (which remains fitted in the machine) only with a mild soap solution;
do not use chemical agents as they can destroy the fabric!
Under the cabin
– see chapter Raising/lowering the cabin on page 3-46
When cleaning under the cabin, open the dirt openings in the floor of the chassis
first, otherwise the hydraulic hoses can be damaged if they are immersed in water
or if the water freezes in winter, reducing the elasticity of the hoses!
Exterior of the machine
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Clean the engine at engine standstill only
Injury hazard!
☞ Stop the engine before cleaning
When cleaning the engine with a water or steam jet
☞ The engine must be cold
☞ and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage!
To Next Page
Loading...
Need help?
General
