Safety
Maintenance 7.13
29
[us] | 06/2020 | 5100056974 | AS | Operator’s manual
Threaded fittings
All threaded fittings must comply with the specified specifications and be
firmly bolted together. Observe the tightening torques! Screws and nuts
must not be damaged, bent or deformed.
Particular attention should be paid to the following:
• Self-locking nuts and micro-encapsulated screws must not be reused
after loosening. The fastening effect is lost.
• Threaded fittings with adhesive protection/liquid adhesives (e.g. Loc-
tite) must be cleaned after loosening and provided with new adhe-
sive.
Information
Observe the instructions of the liquid adhesive manufacturer.
7
To Next Page
Loading...
Need help?
General
