Wacker Neuson BP1000

Safety
7.13 Maintenance
28
Operator’s manual | AS | 5100056974 | 06/2020 | [us]
1
1 Cover insert
▪ Do not remove the cover insert 1.
Information
Regulations for the transport of dangerous goods!
If the cover insert is removed, the battery transport box no longer com-
plies with the UN regulations for the transport of dangerous goods.
7.13 Maintenance
• This machine must not be serviced, repaired, adjusted or cleaned
when switched on.
• Take out the rechargeable battery beforehand (depending on the ma-
chine).
• Observe maintenance intervals.
• Observe maintenance plan. Have WackerNeuson Service perform
any work not listed.
• Reinstall the safety devices on the machine after every maintenance
or repair.
• Always replace worn or damaged machine parts immediately. Only
use spare parts from the manufacturer.
• Keep the machine clean.
• Replace any missing, damaged or illegible safety labels immediately.
Safety labels contain important information to protect the operator.
• Carry out maintenance work in a clean and dry environment (e.g.
workshop).
7.13.1 Service
• Only have the machine repaired or serviced by technically trained
personnel.
• Only use original spare parts and accessories. This ensures the oper-
ational safety of the machine.