Operation CT 36 / CT 48
wc_tx000373gb.fm 16
3. Operation
3.1 Application
This trowel is a modern, high production machine intended for floating
and finishing freshly poured concrete slabs. The machine's good
balance, adjustable handle, and easily reached controls add to
operator comfort and productivity. An automatic stop sensor provides
added operator safety. Finishing rates will depend on operator skill and
job conditions.
DO NOT use this machine for any application other than troweling
concrete.
3.2 New Machine Set-up
Trowels are shipped from the factory with the handle removed. Follow
instructions on Installing Blades and Installing and Adjusting Handles
when setting up new machines or when installing new handles and
blades.
3.3 Recommended Fuel
The engine requires regular grade unleaded gasoline. Use only fresh,
clean gasoline. Gasoline containing water or dirt will damage fuel
system. Consult engine owner’s manual for complete fuel
specifications.
To Next Page
Loading...
Need help?
General
