Wacker Neuson CT 36

CT 36 / CT 48 Operation
wc_tx000373gb.fm 21
3.7 Stop Button
See Graphic: wc_gr003219
When the stop button (b) is pressed, the engine will shut off.
To prevent uncontrolled spinning of the trowel, the engine control
module is designed to shutoff the engine under certain conditions. For
example, if the operator loses his/her grip on the trowel, the engine
control module will sense that the machine is spinning and shut off the
engine. The momentum of the spinning trowel will engage the brake
and stop the handle from spinning past 270°.
3.8 Before Starting
Before starting trowel, check the following:
• oil level in engine
• oil level in gearbox
• fuel level
• condition of air filter
• condition of fuel lines
• condition of trowel arms and blades
• condition of ring guard
• label descriptions
• handle height to suit operator