CT 36 / CT 48 Maintenance
wc_tx000374gb.fm 31
4.2 Periodic Maintenance Schedule - Wacker
The chart below lists basic machine and engine maintenance. Refer to
your engine Operator’s Manual for additional information on engine
maintenance.
* Perform initially after first 25 hours of operation.
Maintenance, replacement or repair of emission control devices and systems may be performed by
any repair establishment or individual.
Daily After
first 25
hours
Every
2
weeks
or
50 hrs.
Every
75 hrs.
Every
month
or 100
hrs.
Every
150
hrs.
Every
200
hrs.
Every
year
or
300
hrs.
Every
500
hrs.
Check fuel level.
Check engine oil
level.
Inspect fuel lines.
Inspect air filter.
Replace as
needed.
Check external
hardware.
Clean trowel after
each use to remove
concrete splatter.
Change engine oil.
*
Grease blade arms
as needed
Clean air cleaner
elements.
Clean sediment
cup / fuel filter.
Check and clean
spark plug.
Check and adjust
valve clearance.
Replace spark
plug.
To Next Page
Loading...
Need help?
General
