8 Operation and use
28 100_0202_op_0011.fm
8.1.2 Set center pole
The optimum working height of the center pole can be adjusted by turning the star knob.
8.1.3 Remote controlled machine
Remove remote control from the bracket
1. Pull hood opener of rear protective hood until it is unlocked.
2. Completely open the rear protective hood with the hood opener.
3. Unscrew the charging cable from the remote control.
4. Place charging cable in the bracket.
5. Screw screwed nose cap on the connection socket of the remote control.
6. Remove the remote control from the bracket.
Check remote control
Remote control and carrying strap are undamaged.
Remote control is free of dirt.
Item Designation Item Designation
1 Center pole 2 Star knob
Item Designation Item Designation
1 Remote control 3 Charge cable
2 Bracket for remote control 4 Bracket for charger cable
NOTICE
Improper handling can result in damage to the charging cable.
When placing charging cable in the bracket, make sure it will not get pinched when
closing the protective hood.
To Next Page
Loading...
Need help?
General
