Need help?Do you have a question about the Wacker Neuson DPU130Le and is the answer not in the manual?
General| Engine Power | 3.0 kW |
|---|---|
| Centrifugal Force | 30 kN |
| Engine / Motor manufacturer | Honda |
| at speed | 3, 600 rpm |
| Fuel consumption | 1.1 l/h |
| Tank capacity | 3.6 l |
| Max. Compaction Depth | 20 cm (depending on soil) |
| Travel speed max. | 25 m/min (depending on soil) |
| Gradeability max. | 30 % (depending on soil) |
| Engine / Motor type | 4-stroke gasoline engine |
| Engine / Motor output | 3.0 kW |
Explains warning symbols (DANGER, WARNING, CAUTION, NOTICE) and notes.
Location and purpose of the machine's nameplate.
Illustrates and labels key locations on the machine.
Outlines the machine's intended use and prohibited applications.
Details the requirements for operating personnel, including age and training.
Lists recommended personal protective equipment (PPE) for safe operation.
Instructions and precautions for transporting the machine.
General safety guidelines for operating the machine in various environments.
Safety measures specific to operating vibratory plates.
Safety precautions related to the engine and refueling.
Safety guidelines for handling hydraulic oil and systems.
Explains the purpose and location of various safety and information labels on the machine.
Details the protective hoods and emergency stop switch.
Describes the intended use of the machine.
Provides a general description of the machine's components.
Explains the basic working principle of the vibratory plate.
Details how the machine is controlled via remote control.
Defines the operational range and safety zones for remote control.
Describes the machine's diagnostic system for error detection.
Explains settings and customization options available for the machine.
Provides a detailed explanation of how the machine's components function.
Identifies and describes external components and controls of the machine.
Details internal components and controls such as switches and displays.
Explains the various buttons, levers, and indicators on the remote control.
Provides instructions and safety measures for lifting the machine.
Outlines pre-operation checks and preparations, including opening hoods.
Step-by-step guide to activating and starting the machine.
Covers machine operation including movement, slopes, and vibration.
Illustrates how control levers affect the machine's movement directions.
Clarifies machine movement independent of user position and safety distances.
Safety guidelines and procedures for compacting on inclined surfaces.
Instructions on how to move and stop the machine using control levers.
How to switch between slow and fast operation modes.
How to activate and deactivate stand vibration for localized compacting.
Procedures for turning off the remote control and engine.
How to use the emergency stop switch to immediately halt the machine.
Instructions for recharging the remote control battery.
Steps for charging the remote control battery using an external charger.
How to set and coordinate transmission channels for remote operation.
How to access and use the machine's diagnostic menu for information.
Overview of maintenance tasks and their intervals.
Daily checks and maintenance procedures for the machine and remote control.
Regular maintenance tasks based on operating hours (125, 250, 500).
Instructions for cleaning the machine and its remote control.
Procedures for adding fuel to the machine.
How to check and add engine oil to the machine.
Step-by-step guide for changing the engine oil and oil filter.
Procedures for inspecting, cleaning, or replacing the air cleaner.
How to check and add coolant to the machine's cooling system.
Instructions for checking and adding oil to the exciter units.
How to check and add hydraulic oil to the machine.
General steps to follow when a malfunction occurs.
Lists common machine malfunctions, their causes, and remedies.
Explains error messages indicated by receiver units and their solutions.
Explains error messages indicated by remote control lamps and their solutions.
Explains error messages shown by control lamps and display screen.
Procedures for resolving common machine issues.
Guidelines for the proper disposal of batteries according to regulations.
Information about replacement batteries.
Information about the external charger accessory.
Technical specifications for the DPU 130Le model.
Explains numerical codes displayed on the machine's screen.
To Next Page