5 Structure and function DPU 130Le
33
Operator's manual
5.2.4 Receiving area and proximity area of the machine
For safety reasons, the infrared signal can only be transmitted within certain
specific areas.
Receiving area
The machine can only be operated within the receiving area. The receiving area
is approx. 20 m from one of the machine's receiver units.
Within the receiving area, visual contact must always be maintained between the
remote control and the machine. If there is no visual contact, the machine will
stop vibrating and moving.
If you are outside of the receiving area, the machine will not receive commands.
The machine will stop vibrating and moving.
Item Designation Item Designation
1 Receiver unit (front, back) 3 Receiving area
2 Proximity area
To Next Page
Loading...
