9 Maintenance
79
100_0202_mt_0004.fm
Topping up with engine oil
1. Remove dirt around the oil cap.
2. Remove oil cap.
3. If necessary, pour motor oil into the opening until the upper mark is reached
on the oil level dipstick (see chapter Technical data for oil type).
4. Replace and fasten oil cap.
5. Wipe off any spilled oil.
Note: Dispose of the oil in accordance with the applicable environmental regu-
lations.
9.2.4 Changing the engine oil
Item Designation Item Designation
1 Oil cap 4 Oil filter
2 Oil level dipstick 5 Oil drain plug
3Mark
To Next Page
Loading...
