Wacker Neuson DS720 User Manual

1A-5
DS720 OPERATION 1A
1.7 Technical Data
(1)
Refer to Section 1.22 Lubrication.
(2)
Percussion rate can be adjusted with the throttle lever.
ledom/ekamenignE 2KWD-EA04LramnaY
epytenignE enigneleseidekorts-4,rednilyc-elgnis,deloocria
rewopenignE)Wk(pH)1.3(2.4
lluf-deepsenignEmpr0063
eldi-deepsenignEmpr002±0021
tnemegagnehctulc-deepsenignEmpr002±0002
dloc-ecnaraelcevlaV)mm(.ni)51.0(600.0
noitacirbulenignEedargliorettebroCC
)1(
yticapaclioenignE)lm(.zo)008(72
tnemecalpsidnotsiPmc
3
991
epytleuF 54>enatec,leseiD2.oN
yticapacknatleuF)l(.lag)7.5(5.1
noitpmusnocleuF)h/l(.rh/.lag)9.0(52.0
thgiewgnitarepO)gk(.sbl)57(561
etarnoissucreP
)2(
.nim/sekorts007–056
krowekortselgniSpkm/J001
)pu(eohsgnimmarehtfoekortS)mm(.ni)57(3ot
noitacirbulmetsysgnimmaRedarglio03EAS
yticapacliometsysgnimmaR)lm(.zo)098(03
1.5 Sound Measurements
The operating sound levels, measured per the requirements of Appendix 1, Paragraph 1.7.4.f of the EC-Machine
Regulations, are:
- the sound pressure level at operator's location (L
pA
) = 92 dB(A).
- the sound power level (L
WA
) = 103 dB(A).
These sound values were determined according to ISO 3744 for the sound power level (L
WA
) and ISO 6081 for the
sound pressure level (L
pA
) at the operator's location.
1.6 Vibration Measurements
The operating hand/arm vibration level, measured per the requirements of enclosure 1, Paragraph 2.2 or 3.6.3 of the
EC-Machine Regulations, is approximately 16 m/s
2
.
The weighted effective acceleration value was determined according to ISO 8662 Part 1.
The sound and vibration measurements were obtained with the machine operating on crushed gravel at nominal
engine speed.

Wacker Neuson DS720 Specifications

General

Brand	Wacker Neuson
Model	DS720
Category	Power Tool
Language	English